Tigo TS4-A-2F Fire Module Datasheet
DownloadTechnical specifications for Tigo Energy TS4-A-2F fire rapid shutdown module
Tigo TS4-A-F Quick Install Guide
DownloadQuick start guide for Tigo TS4-A-F fire rapid shutdown module
Tigo Energy TS4-A-2F Rapid Shutdown Dual Module with Long 2.2m Cable
The Tigo Energy TS4-A-2F Fire Module is an add-on for your solar panels. It makes sure your solar system meets safety codes by shutting down quickly in case of a fire. Each TS4-A-2F can handle two solar panels. This model (part no. 485-00252-24) comes with 2.2-meter (7.2 feet) long MC4 cables for panels installed in landscape orientation.
Looking for a Better Deal?
Boxes of 20 TS4 modules are available. Call for pricing.
The Tigo Energy TS4-A-2F Fire Module is an add-on for your solar panels, whether they’re already installed or brand new. It makes sure your solar system meets safety codes by shutting down quickly in case of a fire. Each TS4-A-2F can handle two solar panels. This model (part no. 485-00252-24) comes with 2.2-meter (7.2 feet) long MC4 cables for panels installed in landscape orientation. If your panels are installed vertically (portrait orientation), you could use the standard TS4-A-2F (part no. 484-00252-22) module with 1.2-meter cables.
Part no. 485-00252-24
Model TS4-A-2F
15A, 1000W, 1500VUL / 1000VIEC/1500VUL, 2.2m Cable, MC4 Connectors
MLPE, or Module Level Power Electronics, allow you to control and monitor your solar panels at the array level before the energy produced reaches any other components in the system.
Tigo’s TS4 series offer optimization, monitoring, and rapid shutdown features for your solar panels. A differentiation of the TS4 platform when compared with other optimizers and MLPE modules in the market is their compatibility with a wide range of inverter manufacturers. Here is a list of the available MLPE modules and when to use them.
TS4-A-O Optimization
When you wish to optimize your solar production, recommended when shading is present or for complex roof layouts. For PV panels up to 700W.
TS4-A-S Safety
When optimization is not critical, but panel-level monitoring and rapid shutdown features are required. For PV panels up to 700W.
TS4-A-M Monitoring
When only precise production monitoring is needed.
TS4-A-F Rapid Shutdown
When a fully compliant Rapid Shutdown photovoltaic system is required. 1 PV panel per TS4 module.
TS4-A-2F Rapid Shutdown Dual
When a fully compliant Rapid Shutdown photovoltaic system is required. 2 PV panels per TS4 module.
| Model | Main Function |
Optimization | Monitoring | Rapid Shutdown |
Required (sold separately) |
PV Panels per TS4 |
| TS4-A-O | Optimization | Yes | Yes | Yes | CCA + TAP | 1 |
| TS4-A-S | Safety | – | Yes | Yes | CCA + TAP | 1 |
| TS4-A-M | Monitoring | – | Yes | – | CCA + TAP | 1 |
| TS4-A-F | Rapid Shutdown | – | – | Yes | RSS Transmitter | 1 |
| TS4-A-2F | Rapid Shutdown | – | – | Yes | RSS Transmitter | 2 |
For a complete TS4 supported system, connect a TS4-A-O, TS4-A-S, or TS4-A-M module to each solar panel in the array. It is possible to combine different TS4 models in the same system. Then install the CAA and your TAP (RSS transmitter for TS4-A-F and TS4-A-2F) to enable the TS4 modules to communicate with Tigo’s monitoring platform. Now you can monitor and manage your solar system through Tigo’s Energy Intelligence monitoring portal.
